Hardwax Oil Ultra (Clear)

• Has a “warming” effect on lighter coloured timbers (this can be prevented by first applying Treatex Hardwax Oil Ultra Natural is desired)

• Usually, no sanding is required between coats (the timber grain may sometimes raise, which can be solved by a light sanding)

• Withstands high temperatures

• Easy to maintain with Treatex Wax Polish

• Spot repairable

• Slip resistance test BS 7976-2PTV certified. Suitable for domestic, commercial and wet areas.

• Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc.

• Safe for use on children’s toys: DIN EN 71-3

• Meets with VOC emissions regulations

• Recommended for those with dust allergies; dirt and dust can be removed easily

• Contains no biocides, preservatives or carcinogens

• Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive

• Easy to apply - buffed, brushed or rolled on

• Quick drying - usually dry within 3-6 hours - dry in 1 hour when buffed

• Low odour

• Water-resistant

• Very durable - further strengthened with Treatex hardener

• Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean

• Food safe: BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion

Suitable for: Internal use
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.

Please Note! 
Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied*

Coverage

0.5L will cover approximately 10m² in one coat / 6m² in two coats depending on the timber and method of application.
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
10L will cover approximately 200m² in one coat / 120m² in two coats depending in the timber and method of application.
1L will cover approximately 3 doors in two coats depending on the timber and method of application.

*Natural can be used as a top coat with Spruce Colour Tone to achieve a pure bright white (see: Hardwax Oil Natural).

Application Method 1 - when buffing the first coat with a machine

• Sand 120-150 grit - Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil

• Apply a thin coat of ULTRA using a good quality roller

• Leave for 10 minutes

• Slow buff with a soft pad to remove excess

• Finish using a lint-free cloth under the buffer

• Leave for 45 minutes to dry with good ventilation

• Apply the final coat with a high-quality microfibre roller - do not buff this coat as there won’t be enough product left on the timber to protect properly

• Usually ready for use after 8 hours

• Usually ready for furniture after 18 hours

Application Method 2 - when applying with a brush or roller

• Sand 100-150 grit - Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil

• Apply the first coat using a good quality brush or roller - do not apply thickly - this will result in extended drying times

• First coat will usually be dry within 3-6 hours with good ventilation and airflow

• Apply the second coat using a good quality brush or roller

• Usually ready for use after 8 hours

• Usually ready for furniture after 18 hours

Hover over any of the products below and click ‘Quick View’ to find out more

Finishes

Additives

Cleaning and Maintenance

• DO not apply the product too thickly as drying time will be significantly increased. The best conditions for drying are to raise the room temperature and increase the airflow using windows, a fan or opening a door.

• We stock great-quality Treatex brushes and rollers for use. alternatively use a high-quality microfibre roller or brush.

• Wrap a plastic bag around wet rollers and brushes to prevent them from drying out between coats.

• Treatex Thinners or white spirit are the best way to clean wet brushes and rollers.

Self combustion

• Treatex contains Linseed oil just like other natural oil-based products. You should therefore empty the sawdust out of your mechanical sander before working with anything that has a freshly applied linseed oil-based product. This is because there is a small but possible risk of self-combustion.

After multiple requests, we have had Treatex Hardwax Oil Ultra tested for use with food and liquids. we are pleased to say we passed all tests including some that were not even necessary.

Certificates obtained:

BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion
BS EN 1186-14:2002 Overall migration in 95% Ethanol and Iso-Octane substitute tests
BS EN 71-3:2013+A1:2013 Migration of heavy metal from toys and toy materials

All 3 certificates are available to view by clicking here

Also tested but not yet certifiable:

Formaldehyde release based on regulations 10/2011 EU
Chromium (VI) and Organic Tin

Both of these tests passed well within their required limits. Test results and certificates will be available in the near future. 

Hardwax Oil Ultra Clear has been tested to the standard BS EN 13501‐1 and has passed with a result of Class Cfl‐s1, meaning it is is flame retardant and is suitable for use in commercial flooring application.

The certificate can be viewed by clicking here

Hardwax Oil Ultra Clear has been tested to the standard BS EN 13501‐1 and has passed with a result of Class Cfl‐s1, meaning it is flame retardant and is suitable for use in commercial flooring applications.

Treatex Hardwax Oil Ultra ‘Clear’ has been certified to the latest Child safe standard, EN71-3:2019 - Click here to view certificate

Treatex Hardwax Oil Ultra ‘Clear’ has been certified to the latest Liquid resistance standard, ASTM D1308-02 – Effect of Households Chemicals on Clear & Pigmented Coatings ref. Sect. 6.1.1 – Water, 6.1.13 Beverages with the best possible results - Click here to view certificate

Item No. 210 (Flatt Matt) 220 (Matt) 230 (Satin) 240 (Gloss)

Sizes: 0.5L (d), 1L (e), 2.5L (h), 10L (p) (Gloss only comes in 1L and 2.5L)

Gallery

Want to see our amazing timber finish in action? Click on the images below for full-size photos.