Bangkirai Oil
Included in our range of premium-quality wood finish products is the Treatex Bangkirai Oil: a beautiful wood enhancement designed to provide long-term weathering protection to your outdoor timber surfaces. You can rely on Bankirai Oil to not be worn down by natural weathering, as the oil’s weather resistant properties protect against threats like rot and warping. Plus, our preservative and biocide-free formula helps this wood treatment to maintain your timber for longer.
A 2.5L tin of Treatex Bangkirai Oil will cover an approximately 50 m squared area, depending on the thickness of application and type of timber. This wood finish product tends to work better on untreated timber, as it’s able to better penetrate the wood and offer more robust protection. For best results, only apply on clean, dry surfaces.
Features
Safe for use on children's toys
Not suitable for high tannin content timbers e.g. oak
Will not flake or peel
Very hard wearing
Easy to apply
UV resistant
Highly water resistant
Contains no biocides or preservatives
Usage/Coverage
Suitable for: internal and external use
Recommended timbers: Bangkirai, Yellow & Red Balau, Karri, Massaranduba, Iroko & Ipe
Applications: decking and garden furniture
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.
Preparation/Application
Preparation
Whilst Treatex Bangkirai Oil can be applied over most previous finishes it works much better on unfinished timber. When overcoating a previously finished surface, a trial application is essential. If a previous finish is to be overcoated then it should be lightly sanded. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust, etc. We advise that when using Treatex Bangkirai Oil, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be between 8º𝚌 and 25ºc during application and drying. We strongly recommend a trial application prior to starting the project.
Application
Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Bangkirai Oil. Bangkirai Oil is not a surface building product. Pay particular attention to end grain, on end grain apply wet on wet until product is no longer absorbed by the timber. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Treatex Bangkirai Oil.. After the second coat leave for approximately 12 hours to dry.
Tips
Treatex brushes and rollers are available.
Wet brushes and rollers can be cleaned with Treatex Thinner or white spirit.
Store tins in a cool and frost free environment. Unopened tins will last for five years. Once tins are opened, transfer contents to a smaller airtight container.
Sizes and product numbers
Item No. 31280
Sizes: 2.5L (h)
