Anti Slip Decking Protection
Treatex Anti-Slip Decking Oil is a solvent-free, water-resistant finish designed to enhance traction on exterior wooden surfaces. Made from natural, sustainable oils including sunflower and soybean, it contains a castor oil-based polymer that provides a slip-resistant surface. Ideal for decking, steps, and walkways, this easy-to-apply oil penetrates deeply to protect and preserve the wood's natural beauty. Suitable for both treated and untreated timbers, it covers approximately 17.5–25m² per 2.5L tin with two coats.
Features
Suitable for treated and untreated timbers
Easy to apply
Solvent free
Water resistant
Contains no biocides or toxic ingredients
Safe for use on children's toys
Suitable for outdoor use
Contains a polymer made from castor oil that provides the anti slip surface, which is biologically and organically inert, meaning that it does not bioaccumulate
Usage/Coverage
Suitable for: External use
Recommended timbers: Suitable for use on most species of treated and untreated decking and other timbers
Applications: Decking, steps and exterior wooden walkways
2.5L will cover approximately 17.5m²-25m² in one coat depending on the wood type (rough, sawn, planed). In corrugated timber, consumption may double, due to the increase in surface area.
Preparation/Application
Preparation
Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. We advise that when using Treatex Anti Slip Decking Oi, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oc/<60% humidity during application and drying. Anti Slip Decking Oil has different effects on different surfaces. We strongly advise a trial coat.
Application
Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Anti Slip Decking Oil, allowing approximately 100-165ml per m2. After approximately 8 - 12 hours (avoid moisture exposure during this time) the first coat can be overcoated if required. Apply with a brush or roller a second coat of Anti Slip Decking Oil, again allowing roughly 100-165ml per m2. After the second coat leave for approximately 8-12 hours to dry. The surface can then be used after 24 hours of drying with care. Full hardness will be achieved after 10 day
Tips
Treatex brushes and rollers are available.
Wet brushes and rollers can be cleaned with soap and water.
Store tins in a cool and frost free environment. Unopened tins will last for three years. Once tins are opened, transfer contents to a smaller airtight container.
Sizes and product numbers
Item No. 41100
Sizes: 2.5L (h)